SITE MAP
All Products Made In The U.S.A 
 click on thumbnail to enlarge pictures
Manufacturing Capabilities:  (Cost Effective Solutions)
 | Highly Versatile - Knowledgeable - Solution Orientated. |  | Small Or Large Production Quantities Capable. |  | Metal Foundry Or Plastic Forming & Molding Capabilities. |  | Rapid Prototyping Capabilities. |  | Product Duplication Is Non-Destructive And Accurate. |  | Fast Turn Around To Meet Customer Schedules. |  | Cost - Quality - Schedule - Customer Satisfaction. |
Seat Base And Seat: Overall Dim’s: Length = 26 in Width = 20.5 in Total Height = 42 inches. Seat Base: Base Dim's: 26 in 20 in 12 in Made of Composite Fiberglass lay-up material with Black High Gloss Gel Coat Finish. Sound connector plug and wiring is inserted and bonded into the rear vertical panel of the seat base for connection to the seat speaker. 4 Swiveling Caster Wheels concealed in the Eagle Seat allow for roll up to your desk or have your own cockpit if ordered with Eagle Side Consoles. Seat: Seat Dim's: 12.5 in 20.5 in 34 in Polyethylene material that is roto-molded to provide a very strong yet hollow seat to allow the full impact of the subwoofer speaker to transmit sound through out the chair. Excellent Back and Lumbar Support. Molded in threaded inserts. Compatible with 5 point harnesses. Seat Cover Speaker = 6 1/2 inch Clear Polypropelyne Woofer Cone. Specially Treated Purple Foam Edge. 1 in High Temperature Aluminum Voice Coil. 40 oz Strontium Magnet Structure Weight. Bumped Yoke Plate for Extended Excursion. Vented Motor Structure. Power Handling: 200 watts Max. Freq Response: 60Hz – 3.5kHz. Sensitivity: 96dB. Impedance: 4 Ohms
The simulator user was the primary consideration when this seat cover was designed to allow many hours of continuous comfortable use. Designed of Black Vinyl with 1 inch padding to High Rev Simulators specifications to eliminate the use of Velcro and high pitched snap rattle caused by sound vibration. EAGLE SIDE CONSOLES: Dim’s: Length = 27 in Width = 9 in Total Height = 25 inches. Made of composite fiberglass lay-up with a High Gloss Black Gel Coat Finish. Removable Composite Fiberglass Top Cover is installed with Alan Head Screws for a Decorative Finish with an awesome look. Perfect for the Cockpit or heavy gamer - Impressive to say the least. High Rev Simulators is at it again! The saying "the best just keep getting better" had to have been invented to describe the Eagle Seat. The must-have chair for any flight sim fan, the Eagle Seat now can be obtained in several different configurations. The stock Eagle Seat is mounted on a hand laid composite fiberglass base. Featuring an improved, more efficient subwoofer for even more sensorial as well as auditory inputs to your body from your flight sim. With the 200-watt subwoofer mounted to completely hollow PVC Plastic Seat the sound travels the full length and width of the chair. In addition, you can now get the Rolling Eagle Seat - a version of the Eagle seat on a very nice, futuristic looking, rolling base. Perfect for the cockpit/computer room that needs an easily movable chair. High Rev Simulators also designed its own custom seat cover for maximum comfort and durability for long playing times. We also eliminated the usual high-pitched rattling scream of vibrating snaps and the use of Velcro strips that wear out with time. Assembling the Eagle Seat is reasonably easy. It comes in a large (very large! box, mostly unassembled. However, the directions are clear and the setup is easy. You might want a power screwdriver to make it go faster. The whole process takes about one half hour to assemble. However, you are so eager to try the Eagle Seat that the time flies.
The Eagle Seat, however, does need two extra devices. First, you will need an external amplifier (the more powerful the better if you want the full effect). Of course, you will also need a sound card installed in your computer.
We also recommend getting the optional Eagle Side Consoles that come with it, as well. This way you have a place to put your stick and throttle at your sides and add to the realistic look of a cockpit. The Eagle Side Consoles are taller then the Sierra’s and have a removable top for access and are attached in a very decorative design with Allen head bolts.
To sum up, the Eagle Seat and Consoles are "must have" products. They are immersive, tough, long lasting, adding immensely to the experience and are worth the price to the hilt! Call HRS for any additional information and pricing: (661) 947-6820 |